How to change a tap washer (10 Easy Steps)

Tap Washer is easy disk-shaped washers with a central hole or opening. They act as a form of gasket that helps seal off mains water flow behind a tap when the tap head is switched off. In plumbing kits and toolboxes, tap washers are commonly found. The vast majority of the use of tap washers is for easy replacement jobs.

In most situations, wherever a tap is dripping, leaking, or being difficult to open or close, they are the go-to solution. We have tried our best for you to provide optimum information about tap washer, we have also provided you easiest way to replace tap washer by yourself at your home using simple tools like scanner and screwdriver which will be very very helpful and saves your time and money on ongoing process.

Why Would You need to change Tap Washer?

Tap washers are simple disc-shaped devices with a central hole or opening. Most importantly, leaky taps that drip at the rate of one drip per second can waste more than 3,000 gallons per year. Changing your tap washer on time can save plenty of clean water which can save thousands of litre of drinking water.

Learning how to change a tap washer is one of the significant abilities that will turn you from an inexperienced person to someone who really knows their things. You can repair your tap washer yourself with a quick effort, which saves your time and costs you can spend when you call a plumber. It is recommended to change the tap washer every two years.

Where is Tap Washer Located?

The tap washer is under the valve, locked in place with either a screw or a nut. The two main parts, the sitting and the tap washer, would be a traditional tap.

The washer is directed to the seat when the tap is open to building up a strain. Which drives the water out of the sink through the jetty. The washer makes a waterproof seal as you turn off the pad, rubbing against the seat to avoid the water flows in and out of the pad.

Tap washers don’t last forever, alas, and any damage will possibly result in a leaky tap. In the case of wear and tear, where the washer cannot create a waterproof barrier, a small amount of water will flow through. When it gets worn, replacing the tap washer prevents leaks.

Tools Needed to Change Tap Washer

  • Crescent wrench
  • Flat-head screwdriver
  • Phillips screwdriver
  • Adjustable pliers
  • Replacement rubber washer

How to Replace Tap Washer? | 10 Easy Steps

There is nothing more frustrating than hearing “drip, drip, drip” from your kitchen sink or bathroom tap nonstop. This faucet dripping usually caused when there is a problem with your tap.

You can quickly repair tap washers with simple tools available at your home. If you have no idea how to change your tap washers at home then, I am going to provide you simple steps to get rid of water leakage from your bathroom and sink taps, so are you ready? let’s start it now

Step 1

Let’s get started first of all you need to turn off the water supply if you don’t want to flood your bathroom or kitchen.

Step 2

Secondly, you collect all the tools required to repair it  I have mentioned to you the name of tools you should have with you.

Step 3

The repair your washers you need several screws and small parts inside of your leaky tap. So to make sure nothing goes down the drain, make sure you plug your sink in.

Step 4

Removing the tap head or the top of the tap it can be easily done by undoing the screw holding it in place, and then prying it open using your flathead screwdriver.

Step 5

Now remove the valve with an adjustable spanner. If you find that your tap valve is rigid and difficult to detach, you can either hang on to the tap lever or tie a piece of cloth around it with your wrench.

Step 6

After you remove the valve you will find the tap washer right there, secured into place with either a screw or a nut. and then you can remove the old tap washer using a spanner or screwdriver.

Step 7

And then, you can replace the old tap washer with a new tap washer.

Step 8

Screw the valve back into place, oh and yes you must make sure that you didn’t screw nut tightly, it may damage your tap.

Step 9

Then fasten the tap head or the tap handle back on it.

Step 10

and lastly,

Remove the cloth from your sink, take the plug out of it and turn the water back on it. Finally, you are done!! well done you have changed your tap washers without professional support and then, stopped your tap leaking great !!!

Leaky taps that drip at the rate of one drip per second can waste more than 3,000 gallons per year. That’s the amount of water needed to take more than 180 showers isn’t it frustrating? many people in different areas of our country are dying due to lack of plenty of clean drinking water, some of them are dying of diseases which is the ultimate cause of drinking dirty water.

Fixing a tap washer on time will help you to save tens of thousands of litres of clean water a year, and it can also save a lot of people’s lives, save your money in the process.

Conclusion

As I have already discussed several times the value of pure drinking water, what are the benefits of preventing water leakage, and the implications of not maintaining water?

So preventing tap washer from dripping and changing your tap washer on time can prevent thousands of litre of clean water. If you learn to replace the washer by yourself it can also save your time and money you must be spending on a professional plumber.

We hope that this guide will fill you with the hope that your tap washer will change your performance. In any case, if you need help with replacing your tap washer please feel free to contact the best Cairns plumber and our team will be in touch with you shortly.

Previous Post
How can we conserve Water? 10 Tips To Conserve Water
Next Post
Brown Hot Water From Tap? Here is What It Means!
Menu